Page 1 of 1
Stator Swap
Posted: Fri Dec 28, 2007 1:48 am
by Donnie
Hey all,
Can I swap my '83 stator with the newer one that has the extra wire for hand warmers without any other changes?
Thanks
Donnie
Posted: Fri Dec 28, 2007 1:42 pm
by opsled
Yup.
Posted: Fri Dec 28, 2007 9:07 pm
by jipcee
Yes. But i'm not sure if the extra lead will have power with your flywheel.
I have a 85 stator in my 83 and I get no power to the wire. It could be bad. But everything else works as usual.
Hey, opsled HOW MUCH SNOW DID YOU GET TODAY (Friday Dec. 28)?
Posted: Fri Dec 28, 2007 9:49 pm
by opsled
We probably got about 8" or so and it is stiil coming down although not as hard. It is the wet heavy stuff though an very slippery.
opsled
Posted: Fri Dec 28, 2007 11:42 pm
by Donnie
I have an 85 flywheel and it looks the same. Does anyone know if the handwarmer wire will work then?
Thanks
Donnie
Posted: Sun Dec 30, 2007 2:22 am
by jipcee
Donnie wrote:I have an 85 flywheel and it looks the same. Does anyone know if the handwarmer wire will work then?
Thanks
Donnie
I might have a problem with mine. If the flywheel looks identical it should work.
OPSLED: Had to west of Rockford today. They got 6+ out there.
Hope you had a good ride!
..................................................jipcee
Posted: Mon Dec 31, 2007 12:22 am
by vmax-540
You should use the newer flywheel as well , I was told by a Yamaha Technician that the magnets were different to power the extra coil . If you put both the stator and flywheel on then the extra wire will work, just feed it up to the hand warmers and you are good to go..