What is the diference between those instrument panels? I have seen in the parts manual and wonder what have been changed? I thought they all was like.
81 and 82 has 8m6-77711
83 and 84 has 8u9-77711
85 has             80n-77111
			
			
									
						
							Intrument panel vmax 540 and 81 srx 440e
- 
				arctic srx 500
 - Posts: 29
 - Joined: Tue Sep 25, 2007 7:49 pm
 - Location: Norway
 
Intrument panel vmax 540 and 81 srx 440e
Yamaha- the way it should be
			
						not sure if they are mechanically different but i know the 81 goes to 10000 on the tach i assume the 82 does to... and the guage faces look different... but i imagine they are interchangable
			
			
									
						
							My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
			
						Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
- 
				arctic srx 500
 - Posts: 29
 - Joined: Tue Sep 25, 2007 7:49 pm
 - Location: Norway
 
oh the tank cover! hmmmm never really compared those... im thinking after 84 they ditched the tether... and at least in 86 there was the fuel shutoffs on the tank cover... also 86 on would have snaps for the seat cover i imagine... i dont see why you couldnt swap them around if you wanted
			
			
									
						
							My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
			
						Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
- 
				arctic srx 500
 - Posts: 29
 - Joined: Tue Sep 25, 2007 7:49 pm
 - Location: Norway
 
Yes you have right. The 80n tank cover has not the hole for the tether.  Now i see the difference between those.
The difference between the 81/82 and the 83/84 are the hole in the front of the tank cover, where the rubberflap shall be(over the airbox), and the 85 did not have the hole for the tether.
Thanks Tyler 440.
			
			
									
						
							The difference between the 81/82 and the 83/84 are the hole in the front of the tank cover, where the rubberflap shall be(over the airbox), and the 85 did not have the hole for the tether.
Thanks Tyler 440.
Yamaha- the way it should be
			
						i try... not always right but im usually pretty close 
			
			
									
						
							My airbox is held on by one screw, not because Im lazy but because it is less weight!
Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
			
						Any questions or comments about this site itself can be directed to me at tylerochs@hotmail.com
The 85's on up used the T.O.R.S. (carb shut offs) instead of the tether cord !
			
			
									
						
							https://www.youtube.com/watch?v=PFb6NU1giRA
"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
			
						"I prefer dangerous freedom over peaceful slavery." Thomas Jefferson
- 
				arctic srx 500
 - Posts: 29
 - Joined: Tue Sep 25, 2007 7:49 pm
 - Location: Norway